8 Animal Wooden Spoon CNC Bundle 50% OFF

🎁 8 Carved Animal Wooden Spoons, One Bundle, 50% OFF Eight two-sided carved serving spoons in one download: Bald Eagle, Horse, Mustang Horse, Black Bear, Wolf, Labrador, Crocodile and Rainbow Trout. Bought one by one they come to $51.12 (8 x $6.39). In this bundle you get all eight for $25.56: exactly 50% OFF. Save $25.56 vs buying separately. 🍴 Why You'll Love This Bundle Each spoon is a complete two-sided CNC job carved in the round: the animal and the handle are sculpted on both faces, and the bowl stays smooth for kitchen use. Together they make a rustic set for a cabin or lodge kitchen, a craft show table full of different animals, or eight gifts for the cooks, hunters, anglers, horse and dog lovers in your life. 🐾 The Eight Spoons (every spoon 300 mm / 11.8 in long): ✔️ Bald Eagle Head Spoon: a bald eagle head (hooked beak, layered feathers); spoon 300 x 82 x 32 mm, blank 360 x 107 x 34.5 mm ✔️ Horse Head Spoon: a horse head with a long flowing mane; spoon 300 x 81 x 40 mm, blank 359 x 116 x 41.5 mm ✔️ Mustang Horse Head Spoon: a mustang horse head turned in side profile with a long flowing mane; spoon 300 x 83 x 38 mm, blank 360 x 118 x 40.5 mm ✔️ Black Bear Head Spoon: a black bear head with thick fur; spoon 300 x 82 x 54 mm, blank 360 x 116 x 56 mm ✔️ Wolf Head Spoon: a wolf head with a ruff of fur; spoon 300 x 76 x 52 mm, blank 359 x 111 x 54.5 mm ✔️ Labrador Head Spoon: a Labrador retriever dog head with soft floppy ears; spoon 300 x 84 x 61 mm, blank 360 x 119 x 63.5 mm ✔️ Crocodile Head Spoon: a crocodile whose scaly body and tail form the handle and whose front legs hug the base of the bowl; spoon 300 x 84 x 53 mm, blank 360 x 119 x 55.5 mm ✔️ Rainbow Trout Spoon: a whole rainbow trout carved as the handle: its spotted, scaled body, fins and forked tail form the handle and its head meets the neck of the bowl; spoon 300 x 66 x 30 mm, blank 360 x 100 x 32 mm 📁 What You Receive Eight ready-made two-sided CNC jobs, one folder per spoon, with no 3D modeling work required. Open the files in Aspire, VCarve Pro, Carveco, Cut3D, Fusion or your preferred CNC software and prepare your toolpaths. Digital product only, no physical item will be shipped. 🗂️ What's In Every Spoon Folder (numbered folders): ✔️ 1 Start here: the README (which file to open) and the step-by-step two-sided guide (PDF) with a shop-wall setup card ✔️ 2 Aspire or VCarve: ONE model for a two-sided mode (also Cut3D, Fusion, MeshCAM) ✔️ 3 Any other CAM: Side A and Side B as two jobs, with DXF and SVG vectors ✔️ 4 Drilling and test cut: the dowel drill points (CSV) and a small registration test ✔️ Extras: greyscale height maps and the same files at 3 other zero points (corner or centre, Z0 top or bottom) 🔁 How A Two-Sided Job Works: ✔️ Carve side A, turn the board over on two 6.35 mm (1/4 in) dowel pins, carve side B; the sides line up exactly ✔️ Holding tabs keep each spoon in its frame; sand the stubs flush after release ✔️ Tools are worked out per spoon (6.35 mm flat end mill for roughing, tapered ball nose for finishing, 6.35 mm drill for the dowels); feeds, stepdowns and tool lengths are in each guide ✔️ Wood: a close-grained hardwood such as maple, cherry, walnut or beech; finish with food-safe mineral oil or board butter ✔️ The bowl and every surface that touches food are smooth; the carving is on the handle only 🛠️ Works With Any CAM: ✔️ Aspire, VCarve, Cut3D, Fusion, Carveco, MeshCAM, Easel Pro, Carbide Create Pro and others 📦 Delivery Instructions: After purchase, download the PDF from your order, open it and click a download button inside. One button downloads all eight spoon jobs in one ZIP; each spoon also has its own button if you prefer smaller downloads. ✨ Fill Your Kitchen With Carved Wildlife Eight different animals, eight complete two-sided jobs, half the price. Add the whole set to your workshop today.