Flock of Geese in Flight Over Water Bas-Relief STL

A skein of geese drops low over open water, wings spread wide and bodies banking toward the surface. The lead bird leans into the air with every feather catching shadow, and the smaller geese trail behind in a falling line that pulls your eye right down to the ripples. Carve this in walnut and the whole panel reads like a frozen moment from a cold morning on the marsh. This is a high-detail bas-relief STL built for clean carving and honest depth. The layered wings rise off a softly waved background, the water carries fine grain lines, and the contrast between the raised birds and the recessed field gives you strong shadow play once the light hits it. It is ready for Aspire, VCarve Pro, Carveco, ArtCAM, and Fusion 360, and it runs well on a CNC router or a 3D printer. For the cleanest result, rough it with a 6mm end mill at 40 percent stepover, then come back with a 3mm ball nose at a tight 10 percent stepover to pull out the feather detail and the ripple texture. Cut it in hardwood, MDF, or acrylic and scale it up if you want sharper layering across the wingtips. A light stain wash makes the geese lift right out of the panel. This is an instant digital download, and commercial use is included, so carve it for your own wall, sell finished pieces at the lodge or the cabin show, or hand one to the waterfowl hunter in your life. Add it to your cart, download it now, and get it on the machine.