Mallard Ducks Live-Edge Marsh Platter Bas-Relief STL

Two mallards lift off the water while a third drifts low through the shoreline reeds, all framing a deep, hollowed platter with the rough live-edge feel of a slab pulled straight from the woods. The finished carve looks like something a lodge wood-carver spent a winter on. Pine treeline in the distance, rippling marsh texture underfoot, and that bowl-smooth recess in the middle that practically begs to hold something. This is a high-detail bas-relief STL built for clean machining. The recessed center reads soft and dished while the ducks, feathers, and reeds hold crisp definition and real shadow depth around the rim. Drop it into Aspire, VCarve Pro, Carveco, ArtCAM, or Fusion 360, set your toolpaths, and let it run. It carves well on a CNC router and the relief detail also translates nicely on a capable 3D printer. For the best surface, hog out the bulk with a 6mm end mill at forty percent stepover, then come back with a 3mm ball nose finishing pass at ten percent stepover to pull out the feather and bark texture. Run it as a functional serving tray, a charcuterie display, a piece of cabin wall art, or a centerpiece for a duck hunter's table. You get an instant digital download with commercial use included, so carve it for yourself, gift it to the waterfowler in your life, or sell the finished pieces at your next show. No physical item ships, just the STL ready to load and cut. Add it to your cart and start carving.